Table of Contents
Advertisement
Table 6-2 Valid gain adjustment input values (continued)
AC current
Capacitance
DC voltage gain adjustment procedure
Review the
considerations"
1 Press
2 The primary display will show the uncalibrated value and the upper
3 Configure each adjustment item shown in
N O T E
4 Use
5 Apply the input signal shown in the "Input" column of
N O T E
U3606A User's and Service Guide
Function
Range
• 1 mA
• 10 mA
• 100 mA
• 1000 mA
• 0.4 nF
• 1 nF
• 10 nF
• 100 nF
• 1 μF
• 10 μF,
• 100 μF
• 100 μF
• 10000 μF
"Test Considerations"
on page 191 sections before beginning this procedure.
V
to enter the DC voltage gain calibration. The DC annunciator
will be illuminated.
secondary display will show the reference value of the adjustment item.
If the zero offset adjustment procedure has been recently performed prior
to the DC voltage gain calibration procedure, the adjustment item "Short"
can be omitted.
or
to select the adjustment item.
Always complete tests in the same order as shown in
Calibration Procedures
Adjustments procedures
Valid amplitude
input values
0.9 to 1.1 × full scale
0.9 to 1.1 × full scale
on page 140 and
"Gain adjustment
Table 6-
Page
page 200
page 201
3.
Table 6-
3.
Table
6-3.
193
6
Advertisement
Table of Contents
