Enabling The Output - Agilent Technologies U3606A User's And Service Manual

3 DC Power Supply Operation

Enabling the Output

Enabling the Output

The
With the output off, adjustments can be made to the U3606A or the load
without shutting off power to the instrument.
The
output.
• When the output is disabled, the output voltage and current go to zero,
• When the output is enabled, the U3606A regulates the output voltage
The
selected amplitude, frequency, pulse width, and duty cycle.
The output state is stored in volatile memory; the output is always
disabled when power has been turned off or after a remote interface reset.
98
O U T
key controls turn the U3606A output on or off.
S BY
O U T
key can be pressed at any time to enable or disable the U3606A
S BY
and the SBY annunciator is illuminated.
and current at the selected value, and the OUT annunciator is
illuminated.
O U T
key is also used to generate the square- wave output at the
S BY
SBY annunciator
OUT annunciator
U3606A User's and Service Guide