Table of Contents
Advertisement
Table 1-2 U3606A keypad functions (continued)
Key
Source operation
U3606A User's and Service Guide
Description
Press Shift >
Limit
to enable the limit math operation. See
information.
Press Hold to capture and hold a reading within the specified variation and threshold
[2]
values.
See
"Hold"
on page 67 for more information.
• Press
to select a higher range and disable autoranging.
• Press
to select a lower range and disable autoranging.
• See
"Selecting a Range"
Press Shift >
Auto
to enable autoranging and disable manual ranging. See
Range"
on page 54 for more information.
Press Shift >
4½ 5½
to toggle between 4½ digit and 5½ digit mode. See
Resolution"
on page 55 for more information.
Press Shift >
Trig
to enable the single trigger mode. See
page 69 for more information.
Press Voltage to select CV output. Use the directional keys to select a suitable voltage
value. See
"Constant voltage (CV) mode"
Press Current to select CC output. Use the directional keys to select a suitable current
value. See
"Constant current (CC) mode"
• Press
to select the square-wave output. Use the directional keys to set the
voltage amplitude.
• Press
again to cycle through the duty cycle, pulse width, and voltage amplitude
settings.
• See
"Square-wave Output"
on page 54 for more information.
[3]
on page 74 for more information.
on page 76 for more information.
on page 88 for more information.
Getting Started
Product at a Glance
"Limit"
on page 64 for more
"Selecting a
"Setting the
"Triggering the Multimeter"
1
on
17
Advertisement
Table of Contents
