Agilent Technologies U3606A User's And Service Manual page 105

Resetting the OCP condition
Use one of the following methods to reset the OCP circuit after it
activates. If the condition that caused the overcurrent shutdown is still
present, the OCP circuit will turn the output off again.
1 When the OCP circuit trips, the U3606A will immediately prompt you to
2 Alternatively, press Shift >
3 You may read and clear the error message by accessing the utility
4 Press
5 If the OCP continues to trip, try lowering the regulated output current,
U3606A User's and Service Guide
change the OCP trip level. Use the directional keys to select a higher
OCP trip level and press Shift >
changes.
without changing the OCP trip level.
menu. See "Reading error messages"
OU T
to turn the output on.
S BY
or raising the OCP trip level.
DC Power Supply Operation
Save or Voltage (Protect) to save the
Exit or Shift > Protect
on page 114 for more information.
Protection Functions
to exit the edit mode
3
83