Where To Get Drivers; Required Hba; Required Cam Versions For Multipathing - Sun Microsystems J4200 System Overview Manual

TABLE 5-2
Operating System
Windows 2008
Solaris 10, update 6
Linux RHEL 4, version 4.5 and higher
Linux RHEL 5, version 5.2 and higher
Linux SUSE 9, SP 3 and higher
Linux SUSE 10, SP 2 and higher

Where to Get Drivers

For the Linux MPT drivers, go to the following location:
http://www.lsi.com/support/sun/sg_xpci8sas_e_sRoHS.html

Required HBA

To use multipathing with the J4200/J4400 arrays, your servers must be using the
following HBA:
Model number: SG-XPCIE8SAS-E-Z
■
Part number: 375-3487-xx, where xx is 02 or higher
■
Current active firmware version: 011a0000 (1.26.00)
■
Firmware image version: MPTFW-01.26.00.00-IT
■
LSI Logic x86 BIOS image version: MPTBIOS-6.24.00.00 (2008.07.01)
■
FCode image version: MPT SAS FCode Version 1.00.49 (2007.09.21)
■

Required CAM Versions for Multipathing

For the latest information about which versions of the Sun StorageTek Common
Array Manager (CAM) you must use in a multipathing configuration, refer to the
Sun Storage J4200/J4400 Array Release Notes, part number 820-3222-xx, which is
available at the following location:
http://docs.sun.com/app/docs/prod/j4200.array
Required Drivers By Operating System
Required Driver(s)
Included with the software
Included with software
MPT 3.16.00.00
MPT 4.16.00.00
MPT 3.16.00.00
MPT 4.16.00.00
Chapter 5 SAS Multipathing 51