Sun Microsystems J4200 System Overview Manual page 5

Multipathing With Two Arrays and One Host 55
Enabling and Disabling Multipathing in the Solaris Operating System 56
Device Renaming 56
stmsboot Options 56
stmsboot Conditions 57
▼ To Enable Multipathing on all Multipath-Capable Controllers 58
▼
To Disable Multipathing on All Multipath-Capable Controllers 59
▼
To Enable Multipathing on Multipath-Capable Controller Ports 60
▼
To Disable Multipathing on Multipath-Capable Controller Ports 60
Configuring Multipathing on Selected Ports 60
Dynamic Discovery of SAS Devices 60
Enabling and Disabling Multipathing in the Windows Operating System 61
▼ To Enable Multipathing in Windows 2008 61
▼
To Discover Device Multipaths 64
▼
To Select a Load Balancing Policy 68
▼
To Disable Multipathing in Windows 2008 71
Enabling and Disabling Multipathing in the Linux Operating System 79
▼ To Enable Multipathing in Linux 79
▼ To Disable Multipathing in Linux 80
81
6. Troubleshooting and Hardware Replacement with Service Advisor 83
Service Advisor 83
Accessing Service Advisor Procedures 84
Basic Service Procedures 85
Taking ElectroStatic Discharge (ESD) Precautions 85
Reserving the Array for Maintenance 85
Releasing the Array After Maintenance 86
Troubleshooting 86
Contents v