Sun Microsystems J4200 System Overview Manual page 62

7 SYSLOG_PLUGOUT_SPS0
8 SYSLOG_PLUGOUT_SPS1
9 SYSLOG_PLUGOUT_DISK
10 SYSLOG_PLUGOUT_PORT
11 SYSLOG_PLUGIN_OK_SIM0
12 SYSLOG_PLUGIN_OK_SIM1
13 SYSLOG_PLUGIN_FAN0
14 SYSLOG_PLUGIN_FAN1
15 SYSLOG_PLUGIN_SPS0
16 SYSLOG_PLUGIN_SPS1
17 SYSLOG_POWER_BTN
18 SYSLOG_PHY_ERR_CNT
19 SYSLOG_PWROK_SPS0
20 SYSLOG_PWROK_SPS1
21 SYSLOG_NOT_PWROK_SPS0
22 SYSLOG_NOT_PWROK_SPS1
23 SYSLOG_ACOK_SPS0
24 SYSLOG_ACOK_SPS1
46 Sun Storage J4200/J4400 Array System Overview • June 2009
Power Supply 0 was removed.
Power Supply 1 was removed.
Disk 1 was removed.
SAS port 1 is down.
SIM 0 is enabled.
SIM 1 is enabled.
Fan 0 is present.
Fan 1 is present.
Power 0 is present.
Power 1 is present.
Front panel button is pressed
to mute alarm.
PHY error count exceeds
threshold value.
Power supply 0 has power.
Power supply 1 has power.
Power supply 0 has failed.
Power supply 1 has failed.
Power supply 0 is OK.
Power Supply 1 is OK.
J4200 only. System is in a
degraded mode. Reinstall
Power Supply 0 to ensure
a high degree of fault
tolerance.
System is in a degraded
mode. Reinstall Power
Supply 1 to ensure a high
degree of fault tolerance.
Check the connection to
SAS port 1.
The drive slot or SAS port
is unstable. Check disk
status and SAS cable
connections.
Check the connection
between the power cord
and Power Supply 0.
Check the connection
between the power cord
and Power Supply 1.
J4400 only.
J4400 only.