Full Management Software; Remote Proxy; Command-Line Interface - Sun Microsystems J4200 System Overview Manual

The J4200/J4400 array requires a minimum version for CAM of 6.1.1. For detailed
information about which versions of CAM to use with the array, refer to the Sun
Storage J4200/J4400 Array Release Notes, part number 820-3222-xx, which is available
at the following location:
http://docs.sun.com/app/docs/prod/j4200.array
For complete CAM documentation, go to the following location:
http://docs.sun.com/app/docs/prod/stor.arrmgr
For more information about CAM, and to download the latest version, go to the
following location:
http://www.sun.com/storagetek/management_software/resource_management/cam/
Note – If you are using the J4400 array as part of a Sun Storage 7000 Unified Storage
System configuration, you do not use the CAM software suite. Instead, you manage
the array using the management software provided with the Unified Storage System.

Full Management Software

The full management software is installed on a management workstation. The
management software communicates with the J4000 arrays via a proxy agent that is
installed on the data host. It provides:
A browser interface
■
Multiple array management
■

Remote Proxy

The remote proxy agent enables communication, equivalent to in-band management,
from the full management host to the array over an out-of-band-band IP network.
Chapter 1 The Sun Storage J4200/J4400 Array 25