Summary of Contents for Sun Microsystems Storage J4200
Page 1
Sun Storage J4200 Array SIM Board Replacement Guide Sun Microsystems, Inc. www.sun.com Part No. 820-3226-11 April 2008, Revision A Submit comments about this document at: http://www.sun.com/hwdocs/feedback...
Page 2
Copyright 2008 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, Etats-Unis. Tous droits réservés. Sun Microsystems, Inc. a les droits de propriété intellectuels relatants à la technologie qui est décrit dans ce document. En particulier, et sans la limitation, ces droits de propriété...
Contents Removing and Replacing a SIM Board 1 ESD Precautions 1 SIM Board Components 2 Removing and Replacing a SIM Board 3 ▼ To Remove a SIM Board 3 ▼ To Replace a SIM Board 5 ▼ To Verify and Complete the SIM Board Replacement 6 Related Documentation 6 Service Contact Information 7...
Page 4
Sun Storage J4200 Array SIM Board Replacement Guide • April 2008...
Removing and Replacing a SIM Board This document describes replacement procedures for the SAS Interface Module (SIM) customer replaceable unit (CRU) installed in the Sun Storage J4200 array disk tray. This document assumes you have: Identified the disk tray containing the failed SIM board.
SIM Link OUT—SAS outbound connector through which data is sent to another J4200. Serial Management Connector—Left LED—Green—Reserved for Sun Customer Support Personnel Serial Management Connector Serial port—Reserved for Sun Customer Support Personnel Sun Storage J4200 Array SIM Board Replacement Guide • April 2008...
Figure Legend Serial Management Connector—Right LED—Amber—Reserved for Sun Customer Support Personnel Host or SIM Link IN—Top LED—Green Host or SIM Link IN—Bottom LED—Amber Host OUT—Top LED—Green Host OUT—Bottom LED—Amber SIM Link OUT—Bottom LED—Amber SIM Link OUT—Top LED—Green SIM Locate LED—Blue (OK to remove) SIM Power/Fault LED—Green/Amber Removing and Replacing a SIM Board This section describes how to remove and replace a SIM board.
Page 8
Caution – Use care when handling either the new or failed SIM board. Make sure all ESD precautions are being followed. Caution – For products with multiple power cords, all power cords must be disconnected to completely remove power from the system. Sun Storage J4200 Array SIM Board Replacement Guide • April 2008...
▼ To Replace a SIM Board 1. Unpack the new SIM board and do one of the following: Place the failed SIM board in the packing materials so that you can return it to ■ Sun for proper disposal. Properly dispose of the failed SIM board. ■...
The Power LED is solid green. ■ The SIM Locate LED is off. See ■ FIGURE 1 Related Documentation For additional information about the Sun Storage J4200 array disk tray, see the following product documentation: Application Title Part Number Regulatory and safety...
Application Title Part Number Power supply replacement Sun Storage J4200 Array Power Supply 820-3227-nn procedures Replacement Guide Fan replacement procedures Sun Storage J4200 Array Fan Replacement 820-3229-nn Guide Chassis replacement Sun Storage J4200 Chassis Replacement 820-4413-nn procedures Guide Rail kit installation...
Page 12
Sun Storage J4200 Array SIM Board Replacement Guide • April 2008...
Need help?
Do you have a question about the Storage J4200 and is the answer not in the manual?
Questions and answers