MUTOH ValueCut Series User Manual page 87

Add Registration Mark by Object
If you tick "Add Registration Mark by Object", you will be offered three options of registration
marks as shown below.
Note:
The values entered in the "4-Point Positioning" section (length, thickness and margin) will still
be applied when you tick "Segmental Positioning" or "Multiple Copies".
CorelDRAW Plug-In
4-Point Positioning
Length: The length of marks
Range: 5mm~50mm
Optimized Setting: 25mm
Thickness: The line thickness of marks
Range: 1mm~2mm
Optimized Setting: 1mm
Margin: The distance between marks and images
Range: 0mm~50mm
Optimized Setting: 5mm
Segmental Positioning
X Step: The distance of intermediate position on the X axis
Y Step: The distance of intermediate position on the Y axis
Range: 200mm~600mm
Optimized Setting: Less than 500mm
Multiple Copies
No. of X Copies: The numbers of copies on X axis
No. of Y Copies: The numbers of copies on Y axis
Range: 1~50. (The more copies you make, the more time
is needed for data transmission.)
Numbers of X Copies * Numbers of Y Copies = The total
amount of image copies
Copies with outline：To show outlines of image graphics
A-4
ValueCut User Manual