MUTOH ValueCut Series User Manual page 43

9600, n, 8, 1, p
9600, o, 8, 1, p
9600, e, 8, 1, p
19200, n, 7, 1, p
19200, o, 7, 1, p
19200, e, 7, 1, p
19200, n, 8, 1, p
19200, o, 8, 1, p
19200, e, 8, 1, p
Firmware To display the version number of Firmware and FPGA code.
Version
Select To select displayed languages on LCM panel in English,
Language Spanish, Italian, Deutsch, Japanese, Portuguese, Polish,
Turkish or French.
Select Units Provide two-unit systems for users convenient.
Scale Length To adjust the scale of media length and width that may cause
by the thickness of the media.
The Denominator is the actual length, and the Numerator is
the ideal length measured from the resultant.
For example, cutting a line with 500.0 mm length. The
procedure as follows:
Scale Width
1. Press the [LEFT ARROW] to choose the Numerator and
select 500.0 mm,
2. Cut the length by sending a graph file,
3. Measure the length then use the [RIGHT ARROW] key to
choose the Denominator, then
4. Press [UP ARROW /DOWN ARROW] to change the values
of the actual length.
The Control Panel
9600pbs, 8 Bits with NO Parity
9600pbs, 8 Bits with ODD Parity
9600pbs, 8 Bits with EVEN Parity
19200pbs, 7 Bits with NO Parity
19200pbs, 7 Bits with ODD Parity
19200pbs, 7 Bits with EVEN Parity
19200pbs, 8 Bits with NO Parity
19200pbs, 8 Bits with ODD Parity
19200pbs, 8 Bits with EVEN Parity
3-8
ValueCut User Manual
English
cm/gram; Metric
inch/oz