Tips For Aas - MUTOH ValueCut Series User Manual

Step 4 Load the printout onto cutter
The Origin Mark is is different from the rest registration marks. Please make sure the
media is fed with correct direction.
Step 5 Cut the Contour
Send out the command from software to perform the contour cutting job.
5.5

Tips for AAS

For getting better results of contour cutting, there are some tips below for your reference.
Keep light sources simple and avoid illuminating from the sides of cutter.
Before operating AAS, change the maximum paper size in ValueCut driver property.
STEP 1 Find the ValueCut model in the "Printer & Fax" folder of your PC.
STEP 2 Open the Properties window and select the "Paper" tab.
STEP 3 Change the maximum Paper Size of X to 1200mm.
Adjust the cutting speed to between 300~600mm/sec.
Avoid the registration marks locating on the tracks of pinch rollers.
Accu-Aligning System 5-9
ValueCut User Manual