MUTOH ValueCut Series User Manual page 107

Multiple Copies
The system will create the as shown in the picture below.
Y axis
Illustrator Plug-In
It is suggested to select "Multiple Copies" when you would
like to make several copies of one image on your material to
increase cutting accuracy.
Multiple Copies
No. of X Copies: The numbers of copies on X axis
No. of Y Copies: The numbers of copies on Y axis
Range: 1~50. (The more copies you make, the more
time is needed for data transmission.)
Numbers of X Copies * Numbers of Y Copies = The
total amount of image copies
Copies with outline：To show outlines of image graphics
Margin: Space between marks; must be 0 or ≧ 20, no
negative numbers allowed
X axis
A-5
ValueCut User Manual