MUTOH ValueCut Series User Manual page 68

Step 2 Placing the Registration Marks
The AAS Layout Instruction:
* Auto-detection function on the 1
Suggested 30mm margin on both left and right sides of media sheet.
Suggested 50-70 mm margin on top and bottom edge of the media sheet to
prevent sheets dropping or any error occurred while media sizing.
Step 3 Print the Graphics
Print the graphic and the marks with your printer
When printing on a roll media, make sure the orientation as following:
Accu-Aligning System
st
mark covers the grey area
(Scaling = 100%).
5-8
ValueCut User Manual