Character Code Selection - TEC B-680 SERIES Maintenance Manual

6. DIAG. TEST OPERATION
6.3.6
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast
forward.
2. A changed font code is stored in memory by pressing the [PAUSE] key.

Character Code Selection

Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 >
D I A G N O S T I C
Press the [FEED] key.
< 2 >
P A R A M E T E R
Press the [PAUSE] key 7 times.
F O N
T C O D E
Select either chracter code with
the [FEED] key or [RESTART]
Key.(See NOTE1.)
Press the [FEED] key
and [RESTART] key
at the same time.
V 1 . 0 A
• PC-8
• PC-857 (MS-DOS/Turkish)
• PC-852 (MS-DOS/Latin 2)
S E T
• PC-850 (MS-DOS/Latin 1)
• Arabic
• LATIN9
• PC-1257 (Windows/Baltic Rim)
- 8 5 0
P C
• PC-1254 (Windows/Trukish)
• PC-1253 (Windoes/Greek)
• PC-1252 (Windows/Latin 1)
• PC-1251 (Windows/Cyrillic)
• PC-1250 (Windows/Latin 2)
• PC-855 (MS-DOS/Cyrillic)
• PC-851 (MS-DOS/Greek 1)
Press the [PAUSE] key .
Continued on Section 6.3.7
Font zero selection.
6-27
EO18-33006
6.3 PARAMETER SETTING MODE