Character Code Selection; Font Zero Selection - TEC B-672 Maintenance Manual

6. DIAG. TEST OPERATION
6.3.6
NOTES:
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es

Character Code Selection

Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 > D I A G N O S T I C
Press the [FEED] key.
< 2 > P A R A M E T E R
Press the [PAUSE] key seven times.
F O N T C O D E
Select either chracter code with
the [FEED] key or [RESTART]
Key.(See NOTE1.)
Press the [FEED] key
and [RESTART] key
at the same time.
1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
enables a fast forward.
2. A changed font code is stored in memory by pressing the [PAUSE] key.
Power off
V 1 . O A
S E T
P C - 8 5 0
Continued on Section 6.3.7

Font zero selection.

6-25
6.3 PARAMETER SETTING MODE
• PC-850
• PC-8
Press the [PAUSE] key .
EM18-33017