Microscan MS-3000 User Manual page 51

Large Intercharacter Gap
Default: Disabled
Options: Disabled, Enabled
Allows the decoder to read labels with gaps between bar code characters
exceeding three times the narrow element width.
Fixed Code Length
Default: Disabled
Options: Disabled, Enabled
Used to increase data integrity by ensuring that only label length will be
accepted.
Code Length
Default: 10
Options: 1 to 31
Note: Fixed Code Length (page
effect.
Allows you to specify the exact number of characters that the decoder will
recognize. The decoder will ignore any code not having the specified
length.
Interleaved 2 of 5
Status
Default: Disabled
Options: Disabled, Enabled
Because I 2 of 5 is a continuous code, it is prone to substitution errors.
Hence, a code length must be defined and a bar code label containing an
even number of digits must be used. It is also recommended that a Modulus
10 check digit be used to ensure the best possible data integrity.
Check Digit
Default: Disabled
Options: Disabled, Enabled
I 2 of 5 uses a Modulus 10 check digit.
MS-3000 Single Head Decoder User's Manual
Code Types Menu
2-25) must be enabled for Code Length to take
2-25