Microscan MS-3000 User Manual page 47

Number of Labels
Default: 1
Options: 1 to 6
Note: If Number of Labels is set to any number greater than one while Match
Code or Continuous Read 1 Output is enabled, Number of Labels will default
back to one.
Allows you to choose the number of different labels that will be read in a
single trigger event. The labels can be a mix of any of the enabled bar
code symbologies and more than one label can be decoded per scan line.
The following conditions apply:
1. Each label must be different to be read.
2. The maximum number of characters in any one label is 31.
3. The maximum number of characters in a single scan line is 62.
4. The maximum number of characters for all labels is 128, including
preamble and postamble and all spaces and commas.
5. All noread messages are posted at the end of the data string.
6. If more than one label is within the scan beam at the same time,
label data may not be displayed in the order of appearance.
Field Separator
Default: , (comma)
Options: Any available ASCII character, except NUL.
Allows you to choose the separator character to be inserted between
labels.
MS-3000 Single Head Decoder User's Manual
Operations Menu
2-21