Microscan MS-3000 User Manual page 127

by menu selection 2-16
by profile card (mode 7) 4-8
Noise Interference 1-14, A-12
Noread (relay driver option)
by menu selection 2-30
by profile card (mode 14) 4-12
by serial command 3-14
Noread Counter Commands
operational command 5-4
Noread Message
by menu selection 2-18
by profile card (mode 8) 4-9
by serial command 3-11
Nulls (as characters) 2-4
Number of Labels
by menu selection 2-21
by serial command 3-11
Number of Reads Before a Good Decode
by menu selection 2-19
by profile card (mode 11) 4-10
by serial command 3-11
O
Object detector 1-4
Operational Commands Summary 5-2
Operations
by menu selection 2-13–2-21
by profile card 4-8–4-10
by serial command 3-10–3-11
See also Triggering Mode, End of Read
Cycle, Timeout, Serial Trigger Char-
acter, External Trigger Polarity, No-
read Message, Bar Code Output,
When to Output, Number of Reads,
Match Code, Number of Labels, and
Field Separator
Operations Status Request
by serial command 3-11
P
Parity (aux port)
by menu selection 2-10, 2-12
MS-3000 Single Head Decoder User's Manual
by serial command 3-9
Parity (host port)
by menu selection 2-10
by profile card (mode 3) 4-6
by serial command 3-8
PLC (programmable logic controller) 1-7
Point-to-Point
by menu selection 2-6
by profile card (mode 5) 4-7
by serial command 3-6
Point-to-Point with RTS/CTS
by menu selection 2-6
by profile card (mode 5) 4-7
by serial command 3-6
Point-to-Point with RTS/CTS & XON/XOFF
by menu selection 2-7
by profile card (mode 5) 4-7
by serial command 3-6
Point-to-Point with XON/XOFF
by menu selection 2-7
by profile card (mode 5) 4-7
by serial command 3-6
Poll Character A-20
Polling Mode D
by menu selection 2-7
by profile card (mode 5) 4-7
by serial command 3-6
Postamble
by menu selection 2-9
by profile card (mode 4, enable/disable
only) 4-7
by serial command 3-7
Power Connector 1-6
Preamble
by menu selection 2-9
by profile card (mode 4, enable/disable
only) 4-7
by serial command 3-7
Product Approvals. See Approvals
Profile Card
binary calculation 4-13
defaulting A-4
I-5