Setting The Default Magnification Ratio Of The Default Cassette; Setting Of Deflection For Feeding From Dp; Checking Of Toner Area Code - Kyocera TASKalfa 181 Service Manual

Maintenance
item No.

Setting the default magnification ratio of the default cassette

U941
Description
Sets the default magnification ratio when paper selection of copy default setting is set to the default cassette.
Purpose
To be set according to user request.
Setting
1. Press the start key.
2. Select the magnification using the cursor up/down keys.
Display
100
Aut
Initial setting: 100% magnification
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Setting of deflection for feeding from DP

U942
Description
Adjusts the deflection generated when the DP is used.
Purpose
Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the DP is used.
Setting
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
FEED MOT
REV MOT
3. Press the interrupt key.
4. Place an original on the DP and press the start key to make a test copy.
5. Change the setting value using the cursor left/right keys.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of original
occurs, decrease the value.
6. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Checking of toner area code

U969
Description
Displays the toner area code.
Purpose
To check the toner area code.
Method
1. Press the start key. The toner area code is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
100% magnification
Auto magnification selection
Description
Deflection in the original feed motor
Deflection in the original switchback motor
Setting range Initial setting
-10 to 20 0
-10 to 20 0
2KJ/2KH
1-3-65