Displaying The Rom Version; Initializing All Data - Kyocera TASKalfa 181 Service Manual

2KJ/2KH
Maintenance
item No.

Displaying the ROM version

U019
Description
Displays the part number of the ROM fitted to each PWB.
Purpose
To check the part number or to decide, if the newest version of ROM is installed.
Method
1. Press the start key. The ROM version are displayed.
2. Change the screen using the cursor up/down keys.
Display
MAIN
ENGINE
LANG(St)
LANG(Op)
MAIN BOOT
PRINTER
NWS
DP
FINISHER
CASS2
CASS3
CASS4
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Initializing all data

U020
Description
Initializes all the backup RAM on the main PWB to return to the original settings.
Refer to *1 of the maintenance mode item list about the item initialized.
Reset each intialized mode based on an own-status report U000 printed at installing the machine.
Purpose
To be executed as required.
Method
1. Press the start key.
2. Select the [EXECUTE] using the cursor up/down keys.
3. Press the start key. All data in the backup memory is initialized and the default setting for the Japan
specifications is registered.
4. When initialization is complete, the machine automatically returns to the same status as when the main
power switch is turned on.
1-3-8
Description
Description
Main ROM
Engine ROM
Standard language ROM
Optional language ROM
Boot of main ROM
Printer ROM
Optional network scanner ROM
Optional DP ROM
Optional built-in finisher ROM
Optional first paper feeder ROM (standard for 22 ppm model)
Optional second paper feeder ROM
Optional third paper feeder ROM