Setting Backup Data Reading/Writing - Kyocera TASKalfa 181 Service Manual

Maintenance
item No.

Setting backup data reading/writing

U917
Description
Stores backup data from the fax control PWB (when an optional fax kit is installed) into CompactFlash or
reads the data from CompactFlash.
Purpose
To store and write data when replacing the PWB.
Setting
1. Press the power key on the operation panel, and after verifying the power indicator has gone off, switch
off the main power switch. And then unplug the power cable from the wall outlet.
2. Remove the screw and remove the slot cover.
3. Insert Compact Flash in a notch hole of the machine.
4. Connect the power plug. While pressing the copier key, turn the main power switch on.
Press and hold on the Copier key until the message "Please wait." disappears.
5. Enter the maintenance item.
6. Press the start key.
7. Select the item using the cursor up/down keys.
Display
SRAM→CF:BKUP
CF→SRAM:BKUP
SRAM→CF:DIAL
CF→SRAM:DIAL
8. Press the start key. Reading or writing is executed, and the screen displays the result.
If the operation was successful:
EXECUTE 0100
CHECK SUM ****
CODE 0000
If the operation failed:
EXECUTE 0100
CHECK SUM ****
CODE XXXX
Where XXX is the error code indicating the reason for the failure.
See Error Codes for Operation U917 and U926 below.
9. Press the power key on the operation panel, and after verifying the power indicator has gone off, switch
off the main power switch. And then unplug the power cable from the wall outlet.
10. Remove the Compact Flash from the machine.
11. Refit the slot cover.
Error Codes for Operation U917 and U926
Code
0102
0103
0104
0105
01FF
0202
0203
0204
0205
0206
0207
0212
Description
Description
Writing the backup data of fax control PWB
Reading the backup data of fax control PWB
Writing the backup data of fax dial information
Reading the backup data of fax dial information
Description
Detects call for service on fax control PWB.
Detects call for service on engine PWB.
Communication error.
Detects call for service on main PWB.
CF error.
No CF card.
No data in CF card.
CF data is incompatible.
Bad CF data (Checksum error)
CF read error.
CF write error.
Fax control PWB flash memory error.
2KJ/2KH
1-3-61