Stabilizing Fixing Forcibly; Resetting The Fuser Problem Data; Checking/Clearing The Fuser Counts - Kyocera TASKalfa 181 Service Manual

Maintenance
item No.

Stabilizing fixing forcibly

U162
Description
Stops the stabilization fixing drive forcibly, regardless of fixing temperature.
Purpose
To forcibly stabilize the machine before the fixing section reaches stabilization temperature.
Method
1. Press the start key.
2. Press the start key. The forced stabilization mode is entered, and stabilization operation stops regard-
less of fixing temperature. The screen for selecting a maintenance item No. is displayed. To exit the
forced stabilization mode, turn the power off and on.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Resetting the fuser problem data

U163
Description
Resets the detection of a service call code indicating a problem in the fuser section.
Purpose
To prevent accidents due to an abnormally high fuser temperature.
Method
1. Press the start key.
2. Press [EXECUTE] using the cursor up/down keys.
3. Press the start key. The fuser problem data is initialized.
4. The machine automatically returns to the same status as when the main power switch is turned on.

Checking/clearing the fuser counts

U167
Description
Displays and clears the fuser counts for checking.
Purpose
To check or clear the fuser counts after replacing the fuser unit.
Method
1. Press the start key. The fuser counts is displayed.
Setting
1. Select [COUNT] using the cursor up/down keys.
2. Change the count using the numeric key.
3. Press the start key. The count is set.
Clearing
1. Select [CLEAR] using the cursor up/down keys.
2. Press the start key. The count is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
2KJ/2KH
1-3-39