Detaching And Refitting The Forwarding Pulley And Paper Feed Pulley - Kyocera TASKalfa 181 Service Manual

2KJ/2KH

(2) Detaching and refitting the forwarding pulley and paper feed pulley

Follow the procedure below to replace the forwarding pulley and paper feed pulley.
Procedure
1. Remove the lower paper feed unit (see page
1-5-3).
2. Remove the drum unit (see page 1-5-41).
3. Remove five screws and remove the rear
cover.
4. Remove the connector of the paper feed
clutch.
5. Remove the paper feed clutch, stop ring and
bush.
1-5-6
Screw
Screw
Screw
Rear cover
Figure 1-5-8
Stop ring
Paper feed clutch
Figure 1-5-9
Screw
Screw
Bush