Setting The Default Transmission Mode ("Tx Mode/Default" Setting) - Kyocera KM-1650 Operation Manual

Setting the Default Transmission Mode ("TX Mode/Default" setting)

You can select which transmission mode, Memory Transmission or Direct Feed Transmission, will
be the default setting in this fax. If you select Direct Feed Transmission for this setting, the
Memory-Tx. indicator will go out.
Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2
Press the
3 Press the Enter key.
4 Press the
5
Press the Enter key.
6
Press the
transmission mode.
The asterisk (*) in the message display indicates the
current setting.
7 Press the Enter key. The setting for the transmission mode is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
key to select Fax Default.
key or the key to select TX/Default.
key or the key to select the desired
Various Settings and Registration
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
Set Volume
Scan from DP
TX/Default
TX/Default:
Direct Feed Transmission
*
Memory Transmission
:Std size
:Memory
7-11