Kyocera TASKalfa 181 Service Manual page 160

2KJ/2KH
8. Remove the springs, stop ring and bush and
then remove the shaft holder from the upper
paper feed unit.
9. Remove the forwarding pulley from the
upper paper feed unit.
10. Remove the paper feed pulley shaft from the
upper paper feed unit.
11. Remove the collar and the paper feed pulley
from the upper paper feed shaft.
12. Replace the forwarding pulley and paper
feed pulley and refit all the removed parts.
1-5-8
Spring
Upper paper feed unit
Figure 1-5-12
Paper feed
pulley shaft
Forwarding pulley
Figure 1-5-13
Shaft holder
Bush
Spring
Stop ring
Paper feed pulley
Collar