Kyocera TASKalfa 181 Service Manual page 204

2KJ/2KH
6. Release hooks at the front side of the right
fuser unit and pull out the fuser heater.
Caution
Do not touch the glass section of the fuser
heater.
7. Replace the fuser heater.
8. Straighten the fuser heater wire in the rear
side of the new fuser heater, and insert it
from the front side of the right fuser unit.
9. Fit both the protrusions in the front and rear
sides of the fuser heater into the notch posi-
tions of the right fuser unit.
Insert the wire between the hooks in the
front side of the right fuser unit until it clicks
to secure it.
1-5-52
Right fuser unit
Hook
Figure 1-5-86
Protrusion
Rear side
Hook
Protrusion
Front side
Figure 1-5-87
Fuser heater
Hook