Initializing Counters And Mode Settings; Initializing Backup Memory; Evacuation Of Backup Data - Kyocera TASKalfa 181 Service Manual

Maintenance
item No.

Initializing counters and mode settings

U021
Description
Initializes all settings, except those pertinent to the type of machine, namely each counter, service call history
and mode setting. Also initializes backup RAM according to region specification selected in maintenance item
U252 Setting the destination.
Refer to *2 of the maintenance mode item list about the item initialized.
Purpose
To return the machine settings to their factory default.
Method
1. Press the start key.
2. Select the [EXECUTE] using the cursor up/down keys.
3. Press the start key. All data other than that for adjustments due to variations between machines is initial-
ized based on the destination setting.
4. When initialization is complete, the machine automatically returns to the same status as when the main
power switch is turned on.

Initializing backup memory

U022
Description
Initializes only the data set for the optical section or initializes various setting data when installing the optional
network scanner board.
Purpose
To be executed as required.
Method
1. Press the start key.
2. Select the [EXECUTE] using the cursor up/down keys.
3. Press the start key.
The data for the optical section (U060 to 067, U092 to 099, U403, U990 and U991) is initialized.
The setting data of scanner function initial settings are initialized, and the registered transmission and
reception are cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Evacuation of backup data

U026
Description
Transfers the backup data of the main PWB to the EEPROM.
Purpose
Used when replacing the main PWB.
Method
1. Press the start key.
2. Select the [EXECUTE] using the cursor up/down keys.
3. Press the start key to transfer the backup data. The screen displays the result.
EXECUTE
CHECK SUM : ****
CODE
Code
0000
0101
0102
4. Press the stop/clear key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
: XXXX (See the table below)
Description
Processing ends correctly.
Verification abnormality occurs.
Verification abnormality occurs at the time of check sum entry.
Description
2KJ/2KH
1-3-9