Events And Levels - Cisco TelePresence Administrator's Manual

Video communication server
Hide thumbs Also See for TelePresence:
Table of Contents

Advertisement

Name
Description
To
for REGISTER requests: the AOR for the REGISTER request
n
for INVITEs: the original alias that was dialed
n
for all other SIP messages: the AOR of the destination.
n
Request-
The SIP or SIPS URI indicating the user or service to which this request is being addressed.
URI
Num-bytes The number of bytes sent/received in the message.
Protocol-
Shows the data contained in the buffer when a message could not be decoded.
buffer
Duration
Request/granted registration expiry duration.
Time
A full UTC timestamp in YYYY/MM/DD-HH:MM:SS format. Using this format permits simple ASCII text
sorting/ordering to naturally sort by time. This is included due to the limitations of standard syslog
timestamps.
Level
The level of the event as defined in the
UTCTime
Time the event occurred, shown in UTC format.

Events and levels

The following table lists the events that can appear in the Event Log.
Event
Description
Alarm
An administrator has acknowledged an alarm. The Detail event parameter provides
acknowledged
information about the nature of the issue.
Alarm lowered
The issue that caused an alarm to be raised has been resolved. The Detail event
parameter provides information about the nature of the issue.
Alarm raised
The VCS has detected an issue and raised an alarm. The Detail event parameter
provides information about the nature of the issue.
Admin Session
An unsuccessful attempt has been made to log in when the VCS is configured to use
CBA
certificate-based authentication.
Authorization
Failure
Admin Session
An administrator has logged off the system.
Finish
Admin Session
An unsuccessful attempt has been made to log in as an administrator. This could be
Login Failure
because an incorrect username or password (or both) was entered.
Admin Session
An administrator has logged onto the system.
Start
Application Exit The VCS application has been exited. Further information may be provided in the Detail
event parameter.
Application
The VCS application is out of service due to an unexpected failure.
Failed
Cisco VCS Administrator Guide (X7.1)
About Event Log levels
section.
Reference material
Level
1
1
1
1
1
1
1
1
1
Page 322 of 479

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence x7.1

Table of Contents