Cisco TelePresence Administrator's Manual page 21

Page Description
element
Information The VCS provides you with feedback in certain situations, for example when settings have
bar been saved or when you need to take further action. This feedback is given in a yellow
information bar at the top of the page.
Sorting Click on column headings to sort the information in ascending and descending order.
columns
Select All Use these buttons to select and unselect all items in the list.
and
Unselect All
Mandatory Indicates an input field that must be completed.
field
Peer-specific † When a VCS is part of a cluster, most items of configuration are applied to all peers in a
configuration cluster. However, items indicated with a
item peer.
Status On configuration pages, this section shows you the current status of the items you are
configuring. Note that some configuration changes require a restart to take effect, so if you
have changed the configuration but not yet restarted this shows the existing (unchanged)
status.
System The name of the user currently logged in and their access privileges, the system name (or
Information LAN 1 IPv4 address if no system name is configured), local system time, currently selected
language, hardware serial number and VCS software version are shown at the bottom of
the page.
Note that you cannot change configuration settings if your administrator account has read-only privileges.
Cisco VCS Administrator Guide (X7.1)
† must be specified separately on each cluster
Introduction
Page 21 of 479