Zone Configuration: Pre-Configured Profile Settings; Tls Certificate Verification Of Neighbor Systems - Cisco TelePresence Administrator's Manual

Zone configuration: pre-configured profile settings

The table below shows the advanced zone configuration option settings that are automatically applied for
each of the pre-configured profiles.
Setting
Monitor peer status
Call signaling routed
mode
Automatically respond
to H.323 searches
H.323 call signaling port 1720
Automatically respond
to SIP searches
Empty INVITE allowed
SIP poison mode
SIP encryption mode
SIP SDP attribute line
limit mode
SIP SDP attribute line
limit length
SIP multipart MIME strip
mode
SIP UPDATE strip mode On
Interworking SIP search
strategy
SIP UDP/BFCP filter
mode
SIP Duo Video filter
mode
SIP record route
address type
SIP Proxy-Require
header strip list

TLS certificate verification of neighbor systems

When a SIP TLS connection is established between a VCS and a neighbor system, the VCS can be
configured to check the X.509 certificate of the neighbor system to verify its identity. You do this by
Cisco VCS Administrator Guide (X7.1)
Microsoft Office Cisco Unified
Communications Communications
Server 2007 Manager
Yes Yes
Auto Always
Off Off
1720
Off Off
Off On
On Off
Microsoft Auto
On Off
130 130
On Off
On
Info Options
Off On
On Off
Hostname IP
<blank> <blank>
Zones and neighbors
Nortel Cisco
Communication Advanced
Server 1000 Media
Gateway
Yes Yes
Auto Auto
Off Off
1720 1720
Off Off
On On
Off Off
Auto Auto
Off Off
130 130
Off Off
On On
Options Options
Off Off
Off Off
IP IP
"com. <blank>
nortelnetworks.
firewall"
Infrastructure
device
No
Always
On
1720
On
On
Off
Auto
Off
130
Off
Off
Options
Off
Off
IP
<blank>
Page 133 of 479