Cisco TelePresence Administrator's Manual page 392

Reference material
Ethernet [1..2] IP V4 Address: <S: 7,15>
Specifies the IPv4 address of the specified LAN port. Note: you must restart the system for any changes to take
effect.
Example: xConfiguration Ethernet 1 IP V4 Address: "192.168.10.10"
Ethernet [1..2] IP V4 StaticNAT Address: <S:7,15>
If the VCS is operating in static NAT mode, this specifies the external public IPv4 address of that static NAT. You
must restart the system for any changes to take effect.
Example: xConfiguration Ethernet 1 IP V4 StaticNAT Address: "64.22.64.85"
Ethernet [1..2] IP V4 StaticNAT Mode: <On/Off>
Specifies whether the VCS is located behind a static NAT. You must restart the system for any changes to take
effect.
Default: Off
Example: xConfiguration Ethernet 1 IP V4 StaticNAT Mode: On
Ethernet [1..2] IP V4 SubnetMask: <S: 7,15>
Specifies the IPv4 subnet mask of the specified LAN port. You must restart the system for any changes to take
effect.
Example: xConfiguration Ethernet 1 IP V4 SubnetMask: "255.255.255.0"
Ethernet [1..2] IP V6 Address: <S: 0, 39>
Specifies the IPv6 address of the specified LAN port. You must restart the system for any changes to take effect.
Example: xConfiguration Ethernet 1 IP V6 Address: "2001:db8::1428:57ab"
Ethernet [1..2] Speed: <Auto/10half/10full/100half/100full/1000full
Sets the speed of the Ethernet link from the specified LAN port. Use Auto to automatically configure the speed.
You must restart the system for any changes to take effect.
Default: Auto
Example: xConfiguration Ethernet 1 Speed: Auto
ExternalManager Address: <S: 0, 128>
Sets the IP address or Fully Qualified Domain Name (FQDN) of the external manager.
Example: xConfiguration ExternalManager Address: "192.168.0.0"
ExternalManager Path: <S: 0, 255>
Sets the URL of the external manager.
Default: tms/public/external/management/SystemManagementService.asmx
Example: xConfiguration ExternalManager Path:
"tms/public/external/management/SystemManagementService.asmx"
ExternalManager Protocol: <HTTP/HTTPS>
The protocol used to connect to the external manager.
Default: HTTPS
Example: xConfiguration ExternalManager Protocol: HTTPS
Cisco VCS Administrator Guide (X7.1) Page 392 of 479