Cisco TelePresence Administrator's Manual page 161

Field Description
State Indicates if the search rule is enabled or not.
Click on the rule you want to configure (or click New to create a new rule, or click Delete to remove a rule).
You can test whether the VCS can find an endpoint identified by a given alias, without actually placing a call
to that endpoint by using the
Cisco VCS Administrator Guide (X7.1)
Locate tool.
Dial plan and call processing
Usage tips
When you are making or testing configuration
changes to your search rules, you may want to
temporarily enable or disable certain rules. You
can do this by selecting the rule's check box
and clicking Enable or Disable as appropriate.
Any disabled rules still appear in the search
rules list but are ignored by the VCS when
processing search requests.
Page 161 of 479