Cisco TelePresence Administrator's Manual page 401

Reference material
Policy AdministratorPolicy Service DefaultCPL: <S: 0,255>
The CPL used by the VCS when the remote service is unavailable.
Default: <reject status='403' reason='Service Unavailable'/>
Example: xConfiguration Policy AdministratorPolicy Service DefaultCPL: "<reject
status='403' reason='Service Unavailable'/>"
Policy AdministratorPolicy Service Password: <S: 0,82>
Specifies the password used by the VCS to log in and query the remote service. The maximum plaintext length is
30 characters, which will then be encrypted.
Example: xConfiguration Policy AdministratorPolicy Service Password: "password123"
Policy AdministratorPolicy Service Path: <S: 0,255>
Specifies the URL of the remote service.
Example: xConfiguration Policy AdministratorPolicy Service Path: "service"
Policy AdministratorPolicy Service Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote service.
Default: HTTPS
Example: xConfiguration Policy AdministratorPolicy Service Protocol: HTTPS
Policy AdministratorPolicy Service Server [1..3] Address: <S: 0,128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote service.
Example: xConfiguration Policy AdministratorPolicy Service Server 1 Address:
"service.server.example.com"
Policy AdministratorPolicy Service Status Path: <S: 0..255>
Specifies the path for obtaining the remote service status.
Default: status
Example: xConfiguration Policy AdministratorPolicy Service Status Path: status
Policy AdministratorPolicy Service TLS CRLCheck Mode: <On/Off>
Controls certificate revocation list checking of the certificate supplied by the policy service. When enabled, the
server's X.509 certificate will be checked against the revocation list of the certificate authority of the certificate.
Default: Off
Example: xConfiguration Policy AdministratorPolicy Service TLS CRLCheck Mode: Off
Policy AdministratorPolicy Service TLS Verify Mode: <On/Off>
Controls X.509 certificate checking and mutual authentication between this VCS and the policy service. When
enabled, the server's FQDN or IP address, as specified in the address field, must be contained within the server's
X.509 certificate (in either the Subject Common Name or the Subject Alternative Name attributes).
Default: On
Example: xConfiguration Policy AdministratorPolicy Service TLS Verify Mode: On
Policy AdministratorPolicy Service UserName: <S: 0,30>
Specifies the user name used by the VCS to log in and query the remote policy service.
Example: xConfiguration Policy AdministratorPolicy Service UserName: "user123"
Cisco VCS Administrator Guide (X7.1) Page 401 of 479