Cisco TelePresence Administrator's Manual page 465

Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {visible if Status is Failed} <No response from neighbor/ DNS
resolution failed>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS
lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalServer: {visible if Type is TraversalServer}
SIP:
Port: <Active/Inactive>
H323:
Port: <Active/Inactive>
Peer [1..6]:
H323: {visible if H323 Mode=On for Zone}
Status: Active
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS
lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {visible if SIP Mode=On for Zone}
Status: Active
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS
lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Calls: {0..900 entries}
Call [0..900]:
CallID: <S: 1,255>
Cisco VCS Administrator Guide (X7.1)
Reference material
Page 465 of 479