Cisco TelePresence Administrator's Manual page 429

Reference material
Zones Zone [1..1000] Neighbor Interworking SIP Encryption EncryptSRTCP: <Yes/No>
Determines whether or not the VCS offers encrypted SRTCP in calls to this zone.Info: the VCS will send an INFO
request.
Default: No
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Encryption EncryptSRTCP:
No
Zones Zone [1..1000] Neighbor Interworking SIP Search Strategy: <Options/Info>
Determines how the VCS will search for SIP endpoints when interworking an H.323 call.
Options: the VCS will send an OPTIONS request.
Info: the VCS will send an INFO request.
Default: Options
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Search Strategy: Options
Zones Zone [1..1000] Neighbor Interworking SIP Video DefaultBitrate: <64..65535>
Specifies which video bitrate to use when empty INVITEs are not allowed.
Default: 384
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Video DefaultBitrate: 384
Zones Zone [1..1000] Neighbor Interworking SIP Video DefaultCodec:
<None/H261/H263/H263p/H263pp/H264>
Specifies which video codec to use when empty INVITEs are not allowed.
Default: H263
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Video DefaultCodec: H263
Zones Zone [1..1000] Neighbor Interworking SIP Video DefaultResolution:
<None/QCIF/CIF/4CIF/SIF/4SIF/VGA/SVGA/XGA>
Specifies which video resolution to use when empty INVITEs are not allowed.
Default: CIF
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Video DefaultResolution:
CIF
Zones Zone [1..1000] Neighbor Monitor: <Yes/No>
Specifies whether the zone monitors the aliveness of its neighbor peers. H323 LRQs and/or SIP OPTIONS will be
periodically sent to the peers. If any peer fails to respond, that peer will be marked as inactive. If no peer
manages to respond the zone will be marked as inactive.
Default: Yes
Example: xConfiguration Zones Zone 1 Neighbor Monitor: Yes
Zones Zone [1..1000] Neighbor Peer [1..6] Address: <S:0,128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the neighbor. If the neighbor zone is a VCS
cluster, this will be one of the peers in that cluster.
Example: xConfiguration Zones Zone 3 Neighbor Peer 1 Address: "192.44.0.18"
Zones Zone [1..1000] Neighbor Registrations: <Allow/Deny>
Controls whether proxied SIP registrations routed through this zone are accepted.
Default: Allow
Example: xConfiguration Zones Zone 3 Neighbor Registrations: Allow
Cisco VCS Administrator Guide (X7.1) Page 429 of 479