Configuring Pipes - Cisco TelePresence Administrator's Manual
Video communication server
Hide thumbs
Also See for TelePresence:
- Administrator's manual (507 pages) ,
- Manual (24 pages) ,
- Specifications (7 pages)
Table of Contents
Advertisement
manually through the web interface
n
automatically by using the CLI command xCommand DefaultLinksAdd
n
Automatically created links
Whenever a new subzone or zone is created, links are automatically created as follows:
New zone/subzone type
Subzone
Neighbor zone
DNS zone
ENUM zone
Traversal client zone
Traversal server zone
Along with the pre-configured default links this ensures that, by default, any new subzone or zone has
connectivity to all other subzones and zones. You may rename, delete and amend any of these default links.
Note: calls will fail if links are not configured correctly. You can check whether a call will succeed, and what
bandwidth will be allocated to it, using the CLI command xCommand CheckBandwidth.
Configuring pipes
Pipes are used to control the amount of bandwidth used on calls between specific subzones and zones. To
apply these limits, you must first create a pipe and configure it with the required bandwidth limitations. Then
when configuring
links
you assign the pipe to one or more links. Calls using the link will then have the pipe's
bandwidth limitations applied to them. See
The
Pipes
page
(VCS configuration > Bandwidth >
the VCS and allows you to create, edit and delete pipes.
The following information is displayed:
Field
Description
Name
The name of the pipe.
Total
The upper limit on the total bandwidth used at any one time by all calls on all links to which this
bandwidth
pipe is applied.
Per call
The maximum bandwidth of any one call on the links to which this pipe is applied.
bandwidth
Calls
Shows the total number of calls currently traversing all links to which the pipe is applied.
Bandwidth
Shows the total amount of bandwidth currently being consumed by all calls traversing all links to
used
which the pipe is applied.
You can configure up to 1000 pipes.
Cisco VCS Administrator Guide (X7.1)
Default links are created to...
Default Subzone and Traversal Subzone
Default Subzone and Traversal Subzone
Default Subzone and Traversal Subzone
Default Subzone and Traversal Subzone
Traversal Subzone
Traversal Subzone
Applying pipes to links
for more information.
Pipes) lists all the pipes that have been configured on
Bandwidth control
Page 213 of 479
Advertisement
Table of Contents
