Registrations By Device; Registrations By Alias - TANDBERG Video Communication Server Administrator's Manual

Table of Contents

Advertisement

Grey Headline (continued)
Status

Registrations by device

The
Registrations by device
page lists each device currently registered with the VCS, and allows you
to remove a device's registration.
To view the
Registrations by device
page:
Status > Registrations > By device
Note that an H.323 device can register with more than one alias; in such cases this page will show
only one alias and (when present) one E.164 number for that device.
Note also that a single device can support both the SIP and H.323 protocols; in such a case the
SIP registration and the H.323 registration will appear as separate entries on this page.
For a list of all aliases currently registered with the VCS, see the
Clicking on device's
name
or
E164
number will take you to the
device.
The page displays the following information:
Name
For H.323 devices, this is one of its aliases. If the device has registered with
more than one alias, this will be (in order of preference) its H.323 ID, URI or email
address. For MCUs and Gateways this will be its alias or, if it has not registered
an alias, one of its prefixes. For SIP devices, this is its SIP AOR.
E164
For H.323 devices that have registered one or more E.164 numbers, the first will
be shown here. For SIP devices this will always be blank because they cannot
register E.164 numbers.
Type
Indicates the nature of the registration. This will most commonly be Endpoint,
MCU, Gateway, or SIP UA.
Protocol
Whether the registration is for a SIP or H.323 device.
Creation Time
The date and time at which the registration was accepted.
If an NTP server has not been configured, this will say
IP address
For H.323 devices, this is the RAS address.
For SIP UAs it is the Contact address presented in the REGISTER request.
Unregister
Click here to remove the selected registrations.
Note that removing a registration will not prevent the same device from automatically re-registering.
Filter
To limit the list of registrations, enter one or more characters in the
Only those registrations that contain (in any of the displayed fields) the string you entered will be
shown. To return to the full list of registrations, click Reset.
Overview and
Introduction
Getting started
status
D14049.05
February 2009

Registrations by alias

page.
Registrations details
page for that
Time not
set.
Filter
field and select Filter.
System
VCS
Zones and
configuration
configuration
neighbors
The
Registrations by alias
page lists all the aliases, E.164 numbers and prefixes used by all
endpoints and systems currently registered with the VCS.
To view the
Registrations by alias
page:
Status > Registrations > By alias
Note that a single H.323 device can register with more than one alias, and each will appear as a
separate entry on this page.
For a list of all devices registered with the VCS, see the
Clicking on any
Alias
will take you to the
that alias.
The page displays the following information:
Alias
The H.323 alias, E.164 number, prefix or SIP AOR registered by a device.
Alias type
Shows whether the alias is an H.323 ID, E.164 number, prefix or SIP AOR.
Device type
Indicates the nature of the device that registered the alias. This will most
commonly be Endpoint, MCU, Gateway or SIP UA.
Protocol
Indicates whether the registration is for a SIP or H.323 device.
Creation Time
The date and time at which the registration was accepted.
If an NTP server has not been configured, this will say
IP address
For H.323 devices, this is the RAS address.
For SIP UAs it is the Contact address presented in the REGISTER request.
Filter
To limit the list of registrations, enter one or more characters in the
Only those registrations that contain (in any of the displayed fields) the string you entered will be
shown. To return to the full list of registrations, click Reset.
Call
Bandwidth
processing
control
33
TANDBERG
VIDEO COMMUNICATIONS SERVER
Registrations by alias
Registrations by device
Registrations details
page for the device that registered
Filter
field and select Filter.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
page.
Time not
set.
Appendices

Advertisement

Table of Contents
loading

Table of Contents