Table of Contents
Advertisement
Grey Headline (continued)
Pipes
About pipes
It is possible to control the amount of bandwidth used on calls
between specific subzones and zones. The limits can be applied
to the total concurrent bandwidth used at any one time, or to the
bandwidth used by any individual call.
To apply these limits, you create a pipe and configure it with the
required bandwidth limitations. Then when configuring links you
assign the pipe to one or more links. Calls using the link will
then have the pipe's bandwidth limitations applied to them.
See
Applying pipes to links
for more information.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
Creating a new pipe
To create a pipe:
•
VCS configuration > Bandwidth > Pipes
You will be taken to the
Select New.
You will be taken to the
xCommand PipeAd
d
•
Editing an existing pipe
To configure details of a pipe:
•
VCS configuration > Bandwidth > Pipes
You will be taken to the
Click on the pipe you wish to configure.
You will be taken to the
•
xConfiguration Bandwidth Pip
System
VCS
Zones and
configuration
configuration
neighbors
Creating and editing pipes
.
Pipes
page.
Create pipe
page.
Pipes
page.
Edit pipe
page.
e
Call
Bandwidth
processing
control
126
TANDBERG
VIDEO COMMUNICATIONS SERVER
Pipe configuration options
Name
Enter the name you wish to give to this pipe. You will refer to this
name when creating links.
Bandwidth restriction
Determines whether there is a limit on the total concurrent
bandwidth of this pipe.
Unlimited: no limitations are in place.
Limited: there is a limit in place; you must enter the limit in the
field below.
NoBandwidth: there is no bandwidth available.
Total bandwidth limit (kbps)
Sets the limit on the total concurrent bandwidth of this pipe.
Bandwidth restriction
Determines whether there is a limit on the bandwidth of
individual calls via this pipe.
Unlimited: no limitations are in place.
Limited: there is a limit in place; you must enter the limit in the
field below.
NoBandwidth: there is no bandwidth available.
Per call bandwidth limit (kbps)
Sets the limit on the bandwidth of individual calls via this pipe.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
