Enabling Findme On The Vcs; Configuring The User Policy Manager - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
FindMe™ (User Policy)
Configuring the User Policy Manager
FindMe requires a User Policy Manager. The VCS has its own User Policy Manager, but there is also
the ability to connect to a User Policy Manager located on another system.
To configure the User Policy Manager:
•
Applications > FindMe > Configuration
You will be taken to the FindMe Configuration
xConfiguration Policy UserPolic
•
The options are:
Mode
Determines whether or not User Policy will be enabled, and if so, the location of the User Policy
Manager.
Off: User Policy is not enabled.
Local: User Policy is enabled and the VCS's own User Policy Manager is used.
Remote: User Policy is enabled and a third-party User Policy Manager located on another system
is used (this feature is intended for future third-party integration). If you select this option, further
configuration options will appear (see below).
Call Policy will always be applied regardless of the User Policy mode.
Protocol
The protocol used to connect to the remote User Policy Manager.
Address
The IP address or domain name of the remote User Policy Manager.
Path
The URL of the remote User Policy Manager.
Username
The username used by the VCS to log in and query the remote User Policy Manager.
Password
The password used by the VCS to log in and query the remote User Policy Manager.
Overview and
Introduction Getting started
status
D14049.05
February 2009
.
page.
y
System VCS
configuration configuration

Enabling FindMe on the VCS

Zones and Call Bandwidth
neighbors processing control
150
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices