Configuring Traversal Server Ports; Overview; Configuration - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
Configuring the VCS as a traversal server

Overview

The VCS Expressway has specific listening ports used for firewall traversal. Rules must be set on
your firewall to allow connections to these ports. In most cases the default ports should be used.
However, you have the option to change these ports if necessary.
Overview and
Introduction Getting started
status
D14049.05
February 2009
Configuring traversal server ports
System VCS Zones and
configuration configuration neighbors
Configuration
To configure the VCS Expressway ports:
• VCS configuration > Expressway > Ports
You will be taken to the Ports page.
xConfiguration Traversal Server Media Demultiplexin
•
xConfiguration Traversal Server H.32
•
The options are:
Media demultiplexing RTP port
Specifies the port on the VCS Expressway to be used for demultiplexing RTP media.
Media demultiplexing RTCP port
Specifies the port on the VCS Expressway to be used for demultiplexing RTCP media.
H.323 Assent call signaling port
Specifies the port on the VCS Expressway to be used for Assent signaling.
H.323 H.460.18 call signaling port
Specifies the port on the VCS Expressway to be used for H.460.18 signaling.
Call Bandwidth
processing control
140
TANDBERG VIDEO COMMUNICATIONS SERVER
g
3
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices