Stun Relays; Presence - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
Status
The

STUN Relays

page provides a list of all the currently active STUN Relays on the VCS. For each
Relay, it shows the requesting client address and port and the corresponding VCS address and
port.
STUN services are available on VCS Expressways only. They are configured from the STUN
page (VCS configuration > Expressway >
To view the STUN Relays page:
•
Status > STUN Relays
The page displays the following information:
Relay The index number of the relay.
Client The IP address and port on the NAT (or the client if there is no NAT) from
which the STUN Relay request has come.
Relay Address The IP address and port on the VCS that has been allocated for this
particular relay request.
Creation Time The date and time on which the STUN Relay became active.
Expiry Time The date and time at which the STUN Relay will become inactive.
Overview and
Introduction Getting started
status
D14049.05
February 2009
STUN relays
STUN).
System VCS
configuration configuration
The Status > Applications > Presence
• Publishers
•
Presentities
•
Subscribers.
These pages provide information about endpoints and presentities using the
the VCS.
Refer to the Viewing presence status
pages.
Zones and Call Bandwidth
neighbors processing control
40
TANDBERG VIDEO COMMUNICATIONS SERVER

Presence

menu has three sub-menus:
Presence
section for a full explanation of the information on these
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
services on
Appendices