Table of Contents
Advertisement
Grey Headline (continued)
Command reference - xConfiguration
Zones Zone [1..200] DNS SIP SearchAutoResponse: <On/Off>
Determines what happens when the VCS receives a SIP search that originated as an H.323 search, destined for this zone.
Off: a SIP OPTION message will be sent to the zone.
On: searches will be responded to automatically, without being forwarded to the zone..
Default: Off.
xConfiguration Zones Zone 1 DNS SIP SearchAutoResponse: Off
Example:
Zones Zone [1..200] DNS ZoneProfile: <Default/Custom/MicrosoftOCS2007>
Determines the way in which the Advanced settings for this zone are configured.
Default: will use the factory defaults for these settings.
Custom: allows you to configure each setting individually.
MicrosoftOCS2007: automatically configures the settings required for connections to a Microsoft Office Communications Server 2007 server.
Default: Default
xConfiguration Zones Zone 1 DNS ZoneProfile: Default
Example:
Zones Zone [1..200] ENUM DNSSuffix: <S: 0, 128>
Specifies the DNS zone to be appended to the transformed E.164 number to create an ENUM host name which this zone is then queried for.
xConfiguration Zones Zone 2 ENUM DNSSuffix: "e164.arpa"
Example:
Zones Zone [1..200] H323 Mode: <On/Off>
Determines whether H.323 calls will be allowed to and from this zone.
Default: On
xConfiguration Zones Zone 2 H323 Mode: On
Example:
Zones Zone [1..200] HopCount: <1..255>
Specifies the hop count to be used when sending an alias search request to this zone. Note: if the search request was received from another zone and already has a hop count assigned, the
lower of the two values will be used.
Default: 15
xConfiguration Zones Zone 2 HopCount: 15
Example:
Zones Zone [1..200] Match [1..5] Mode: <AlwaysMatch/PatternMatch/Disabled>
Determines if and when a query will be sent to this zone.
AlwaysMatch: the zone will always be queried.
PatternMatch: the zone will only be queried if the alias queried for matches the corresponding pattern.
Disabled: the zone will never be queried.
Default: AlwaysMatch (Match 1) Disabled (Matches 2-5)
xConfiguration Zones Zone 2 Match 1 Mode: PatternMatch
Example:
Overview and
Introduction
Getting started
status
D14049.05
February 2009
System
VCS
Zones and
configuration
configuration
neighbors
Call
Bandwidth
processing
control
220
TANDBERG
VIDEO COMMUNICATIONS SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
