TANDBERG Video Communication Server Administrator's Manual page 235

Grey Headline (continued)
Command reference - xCommand
ListSubscribers
Returns a list of all Subscribers who are watching for the presence information of a particular Presentity.
Presentity(r): <S:1..255>
The URI of the Presentity being watched.
xCommand ListSubscribers Presentity: "mary.jones@example.com"
Example:
Locate
Runs the VCS's location algorithm to locate the endpoint identified by the given alias, searching locally, on neighbors, and on systems discovered through the DNS system, within the
specified number of 'hops'. Results are reported back through the xFeedback mechanism, which must therefore be activated before issuing this command (e.g.
event/locate).
Alias(r): <S: 1, 60>
The alias associated with the endpoint you wish to locate.
HopCount(r): <0..255>
The hop count to be used in the search.
Protocol(r): <H323/SIP>
The protocol used to initiate the search.
xCommand Locate Alias: "john.smith@example.com" HopCount: 15 Protocol: SIP
Example:
Log
Sets logging levels on specific modules.
Note: this command is intended for developer use only.
Module: <S:0..255>
The name of the module.
TraceLevel: <Default/Error/Warn/Info/Debug/Trace>
The level of tracing to use on the specified module.
xCommand Log Module: "foo" TraceLevel: Error
Example:
LogPersist
Saves the current log levels so that they will persist over a restart.
This command has no parameters.
xCommand LogPersist
Example:
OptionKeyAdd
Adds a new option key to the VCS. These are added to the VCS in order to add extra functionality, such as increasing the VCS's capacity. Contact your TANDBERG representative for further
information.
Key(r): <S: 0, 90>
Specifies the option key of your software option.
xCommand OptionKeyAdd Key: "1X4757T5-1-60BAD5CD"
Example:
Overview and
Introduction Getting started
status
D14049.05
February 2009
Default returns the trace level to its default value.
System VCS Zones and
configuration configuration neighbors
Call Bandwidth
processing control
235
TANDBERG VIDEO COMMUNICATIONS SERVER
xFeedback register
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices