TANDBERG Video Communication Server Administrator's Manual page 237

Grey Headline (continued)
Command reference - xCommand
RouteAdd
Adds and configures a new IP route (also known as a static route).
Address(r): <S: 1, 39>
Specifies an IP address used in conjunction with the Prefix Length to determine the network to which this route applies.
Default: 32
PrefixLength(r): <1..128>
Specifies the number of bits of the IP address which must match when determining the network to which this route applies.
Gateway(r): <S: 1, 39>
Specifies the IP address of the Gateway for this route.
Interface: <Auto/LAN1/LAN2>
Specifies the LAN interface to use for this route. Auto: The VCS will select the most appropriate interface to use.
Default: Auto
xCommand RouteAdd Address: "10.13.8.0" PrefixLength: 32 Gateway: "192.44.0.1"
Example:
RouteDelete
Deletes a route.
RouteId(r): <1..50>
The index of the route to be deleted.
xCommand RouteDelete RouteId: 1
Example:
Overview and
Introduction Getting started
status
D14049.05
February 2009
System VCS Zones and
configuration configuration neighbors
Call Bandwidth
processing control
237
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices