TANDBERG Video Communication Server Administrator's Manual page 209

Grey Headline (continued)
Command reference - xConfiguration
SIP TCP Outbound Port End: <1024..65534>
Specifies the upper port in the range to be used by outbound TCP/TLS SIP connections.
Default: 29999
xConfiguration SIP TCP Outbound Port End: 29999
Example:
SIP TCP Outbound Port Start: <1024..65534>
Specifies the lower port in the range to be used by outbound TCP/TLS SIP connections.
Default: 25000
xConfiguration SIP TCP Outbound Port Start: 25000
Example:
SIP TCP Port: <1024..65534>
Specifies the listening port for incoming SIP TCP calls.
Default: 5060
xConfiguration SIP TCP Port: 5060
Example:
SIP TLS Mode: <On/Off>
Determines whether incoming SIP calls using the TLS protocol will be allowed.
Default: On
xConfiguration SIP TLS Mode: On
Example:
SIP TLS Port: <1024..65534>
Specifies the listening port for incoming SIP TLS calls.
Default: 5061
xConfiguration SIP TLS Port: 5061
Example:
SIP UDP Mode: <On/Off>
Determines whether incoming SIP calls using the UDP protocol will be allowed.
Default: On
xConfiguration SIP UDP Mode: On
Example:
SIP UDP Port: <1024..65534>
Specifies the listening port for incoming SIP UDP calls.
Default: 5060
xConfiguration SIP UDP Port: 5060
Example:
SNMP CommunityName: <S: 0, 16>
Sets the VCS's SNMP community name.
Default: public
xConfiguration SNMP CommunityName: "public"
Example:
Overview and
Introduction Getting started
status
D14049.05
February 2009
System VCS Zones and
configuration configuration neighbors
Call Bandwidth
processing control
209
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices