Table of Contents
Advertisement
Grey Headline (continued)
Command reference - xStatus
IPv6: {Visible if Status=Active}
Address: <IPv6Addr> {1..2 entries}
H46018:
CallSignaling:
Status: <Active/Inactive/Failed>
IPv4: {Visible if Status=Active}
Address: <IPv4Addr> {1..2 entries}
IPv6: {Visible if Status=Active}
Address: <IPv6Addr> {1..2 entries}
IP:
Protocol: <IPv4/IPv6/Both>
IPv4:
Gateway: <IPv4Addr>
IPv6:
Gateway: <IPv6Addr>
DNS:
Server [1-5]:
Address: <IPv4Addr/IPv6Addr>
Domain: <S: 0, 128>
LDAP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <Failed to connect to LDAP server / The LDAP server does not support TLS. / Failed to establish a TLS connection to the LDAP server. Please check that the LDAP
server certificate is signed by a CA, and that CA is included on the CA certificate installed on the VCS. / Failed to authenticate with LDAP server / A valid CA certificate for the LDAP database has not
been uploaded; this is required for connections via TLS / No server address configured>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Overview and
Introduction
Getting started
status
D14049.05
February 2009
System
VCS
Zones and
configuration
configuration
neighbors
Call
Bandwidth
processing
control
249
TANDBERG
VIDEO COMMUNICATIONS SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
