Table of Contents
Advertisement
Grey Headline (continued)
Command reference - xConfiguration
Zones Zone [1..200] Match [1..5] Pattern Behavior: <Strip/Leave/Replace>
(Applies only if the Match mode is Pattern Match.) Determines whether the matched part of the alias should be modified before an LRQ is sent to this zone.
Leave: the alias will be unmodified.
Strip: the matching prefix or suffix will be removed from the alias.
Replace: the matching part of the alias will be substituted with the text in the Replace string.
Default: Strip
xConfiguration Zones Zone 2 Match 1 Pattern Behavior: Replace
Example:
Zones Zone [1..200] Match [1..5] Pattern Replace: <S: 0, 60>
(Applies only if the Pattern Behavior is Replace.) Specifies the string to be used as a substitution for the part of the alias that matched the pattern.
xConfiguration Zones Zone 2 Match 1 Pattern Replace: "example.com"
Example:
Zones Zone [1..200] Match [1..5] Pattern String: <S: 0, 60>
(Applies only if the Match mode is Pattern Match.) Specifies the pattern against which the alias is compared.
xConfiguration Zones Zone 2 Match 1 Pattern String: "example.net"
Example:
Zones Zone [1..200] Match [1..5] Pattern Type: <Exact/Prefix/Suffix/Regex>
(Applies only if the Match mode is Match.) Determines the way in which the string must match the alias.
Exact: the string must match the alias character for character.
Prefix: the string must appear at the beginning of the alias.
Suffix: the string must appear at the end of the alias.
Regex: the string will be treated as a regular expression.
Default: Prefix
xConfiguration Zones Zone 2 Match 1 Pattern Type: Suffix
Example:
Zones Zone [1..200] Match [1..5] Priority: <1..65534>
Determines the order in which the zone will be sent a search request. Zones with priority 1 matches are searched first, followed by priority 2, and so on.
Default: 100
xConfiguration Zones Zone 2 Match 1 Priority: 100
Example:
Zones Zone [1..200] Name: <S: 1, 50>
Assigns a name to this zone.
xConfiguration Zones Zone 3 Name: "UK Sales Office"
Example:
Zones Zone [1..200] Neighbor H323 Port: <1024..65534>
Specifies the port on the neighbor to be used for H.323 calls to and from this VCS.
Default: 1719
xConfiguration Zones Zone 3 Neighbor H323 Port: 1719
Example:
Overview and
Introduction
Getting started
status
D14049.05
February 2009
System
VCS
Zones and
configuration
configuration
neighbors
Call
Bandwidth
processing
control
221
TANDBERG
VIDEO COMMUNICATIONS SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
