Table of Contents
Advertisement
Grey Headline (continued)
Status
The
OCS Relay status
page lists all the FindMe aliases being handled by the OCS Relay application,
and shows the current status of each.
The OCS Relay application is required in deployments that use both Microsoft Office Communicator
(MOC) clients and FindMe, if they both use the same SIP domain. Its purpose is to:
•
enable the VCS to share FindMe presence information with MOC clients
•
enable the Microsoft Office Communications Server (OCS) to forward calls to FindMe aliases.
To view the
OCS Relay status
page:
•
Status > Applications > OCS Relay
The OCS Relay application is configured from the
Relay).
The information shown on this page is as follows:
Alias
The FindMe name being handled by the OCS Relay application.
Registration state
Indicates whether the FindMe name has registered successfully with OCS. Doing so will allow OCS
to forward calls to the FindMe alias.
Subscription state
Indicates whether the OCS Relay application has subscribed successfully to the FindMe name's
presence information. Doing so will allow MOC clients to view the presence information of FindMe
users.
Presence state
Shows the presence information currently being published for the FindMe alias.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
OCS Relay
OCS Relay
page
(Applications > OCS
System
VCS
configuration
configuration
The
Warnings
page provides a list of all the warnings currently in place on your system (and, where
applicable, their proposed resolution).
Warnings occur when an event or configuration change has taken place on the VCS that requires
some manual administrator intervention, such as a reboot.
When there are unacknowledged warnings in place on the VCS, a warning icon
the top right of all pages.
To view the
Warnings
page, either:
•
click on the
icon
•
go to
Status > Warnings
Acknowledging a warning (by selecting a warning and clicking on the
remove the warning icon from the web interface, however the warning will still be listed on the
Warnings
page with a
status
reappear.
It is not possible for administrators to delete warnings from the
removed by the VCS only after the required action or configuration change has been made.
After a reboot of the VCS, any
reappear with a status of New, and must be re-acknowledged.
Zones and
Call
Bandwidth
neighbors
processing
control
41
TANDBERG
VIDEO COMMUNICATIONS SERVER
Warnings
Acknowledge
of Acknowledged. If a new warning occurs, the warning icon will
Warnings
Acknowledged
warnings that are still in place on the VCS will
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
will appear at
button) will
page. Warnings will be
Appendices
Advertisement
Table of Contents
