Table of Contents
Advertisement
Grey Headline (continued)
Pattern variable reference
Overview
The VCS makes use of pattern matching in a
number of its features, namely
Allow Lists and
Deny
Lists,
pre-search transforms
and
zone
transforms.
For each of these pattern matches, the VCS
allows you to use a variable that it will replace
with the current configuration value(s) before
the pattern is checked.
These variables can be used as either or both
of:
•
all or part of the pattern that is being
searched for
•
all or part of the string that is replacing the
pattern that was found.
The variables can be used in all types of
patterns, i.e. prefix, suffix,
regex
and exact.
The table opposite shows the strings that
are valid as variables, and the values they
represent.
You can test whether a pattern will
match a particular alias and be
transformed in the expected way by
using the
Check pattern
page
(Maintenance >
Tools > Check
pattern).
Overview and
Introduction
Getting started
status
D14049.05
February 2009
String
Equals current value(s) returned by...
%ip%
xConfiguration Ethernet 1 IP V4 Address
xConfiguration Ethernet 1 IP V6 Address
xConfiguration Ethernet 2 IP V4 Address
xConfiguration Ethernet 2 IP V6 Address
%ipv4%
xConfiguration Ethernet 1 IP V4 Address
xConfiguration Ethernet 2 IP V4 Address
%ipv4 _ 1%
xConfiguration Ethernet 1 IP V4 Address
%ipv4 _ 2%
xConfiguration Ethernet 2 IP V4 Address
%ipv6%
xConfiguration Ethernet 1 IP V6 Address
xConfiguration Ethernet 2 IP V6 Address
%ipv6 _ 1%
xConfiguration Ethernet 1 IP V6 Address
%ipv6 _ 2%
xConfiguration Ethernet 2 IP V6 Address
%localdomains%
xConfiguration SIP Domains Domain 1 Name
...
xConfiguration SIP Domains Domain 20 Name
%localdomain1%
xConfiguration SIP Domains Domain 1 Name
...
...
%localdomain20%
xConfiguration SIP Domains Domain 20 Name
%systemname%
xConfiguration SystemUnit Name
System
VCS
Zones and
configuration
configuration
neighbors
Valid variable strings
When used in a Match field
Matches all IPv4 and IPv6 addresses
currently configured on the VCS.
Matches the IPv4 addresses currently
configured on the VCS for LAN 1 and LAN 2.
Matches all IPv4 address currently
configured on the VCS for LAN 1.
Matches all IPv4 address currently
configured on the VCS for LAN 2.
Matches the IPv6 addresses currently
configured on the VCS for LAN 1 and LAN 2.
Matches the IPv6 address currently
configured on the VCS for LAN 1.
Matches the IPv6 address currently
configured on the VCS for LAN 2.
Matches all the SIP domains currently
configured on the VCS.
Matches the specified SIP domain. Up to
20 SIP domains can be configured on the
VCS, and they are identified by an index
number between 1 and 20.
Matches the VCS's System Name.
Call
Bandwidth
processing
control
183
TANDBERG
VIDEO COMMUNICATIONS SERVER
When used in a Replace field
not applicable
not applicable
Replaces the string with the
LAN 1 IPv4 address.
Replaces the string with the
LAN 2 IPv4 address.
not applicable
Replaces the string with the
LAN 1 IPv6 address.
Replaces the string with the
LAN 2 IPv6 address.
not applicable
Replaces the string with the
specified SIP domain.
Replaces the string with the
VCS's System Name.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
